The Swaging SPIN Tool is designed for the most common tubing diameters in HVAC. The high-temperature method preserves the copper’s/aluminum’s malleability while performing the swage, preventing cracks and leaks. The Swaging Spin Tool is for hard and soft copper tubing. It creates a precises deep swage without wobbling or cracking that is easier to braze.

To top that, you can make swages with the SPIN Swaging Tools in just 5 seconds!

To perform the swage in copper/aluminum tubing, simply attach the corresponding SPIN Tool size to a drill*. Because they perform their job using high-temperature and friction, no clamping tools or holders are necessary. Swages made with the SPIN Tools are compatible with high-pressure refrigerants such as R410a.

All SPIN Tools are designed to work with drills and/or screwdrivers, with a minimum of 1,800 RPM and 500 watts, for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills. Using the SPIN Tools with a less powerful equipment tool than suggested, may result decreased and low-quality performances.


  • Flawless swages in five seconds
  • Universal drill compatibility
  • Reusable tool with long-life design
  • Innovative new technology
  • Heat by friction
  • Works with soft copper creating fewer cracks
  • To use with hard cooper just preheat the cooper.



1/4″ – S1014N
5/16″ – S1516N
3/8″ – S1038N
1/2″ – S1012N
5/8″ – S1058N
3/4″ – S1034N
7/8″ – S1078N

6mm – S1806M
8mm – S1808M
10mm – S1810M
12mm – S1812M
14mm – S1814M
15mm – S1815M
16mm – S1816M
18mm – S1818M
19mm – S1819M
22mm – S1822M

Additional information


6mm, 8mm, 10mm, 12mm, 15mm, 16mm, 18mm, 19mm, 22mm, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 14mm