Description

The Flaring SPIN Tool is designed for the most common tubing diameters in HVAC. The high-temperature method preserves the copper’s/aluminum’s malleability while performing the flare, preventing cracks and leaks. The Flaring SPIN tools were developed and are recommended for soft copper.

The SPIN Flaring Tools make flares with the ideal dimensions for a perfect packing, due a wider area of contact between the flare surface and the valve/tube accessory.

To top that, you can make flares with the SPIN Flaring Tools in just 5 seconds!

To perform the flaring in copper/aluminum tubing, simply attach the corresponding SPIN Tool size to a drill*. Because they perform their job using high-temperature and friction, no clamping tools or holders are necessary. Flares made with the SPIN Tools are compatible with high-pressure refrigerants such as R410a.

All SPIN Tools are designed to work with drills and/or screwdrivers, with a minimum of 1,800 RPM and 500 watts, for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills. Using the SPIN Tools with a less powerful equipment tool than suggested, may result decreased and low-quality performances.

FEATURES:

  • Flawless flares in five seconds
  • Universal drill compatibility
  • Reusable tool with long-life design
  • Innovative new technology
  • Heat by friction
  • Works with soft copper creating fewer cracks
  • To use with hard cooper just preheat the cooper.

OPTIONS: 

INCHES

1/4″ – F1014N
5/16″ – F1516N
3/8″ – F1038N
1/2″ – F1012N
5/8″ – F1058N
3/4″ – F1034N
7/8″ – F1078N

MM
6mm – F1806M
8mm – F1808M
10mm – F1810M
12mm – F1812M
14mm – F1814M
15mm – F1815M
16mm – F1816M
18mm – F1818M
19mm – F1819M
22mm – F1922M

Additional information

Sizes

6mm, 8mm, 10mm, 12mm, 15mm, 16mm, 18mm, 19mm, 22mm, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 14mm