Imperial 275 45 Degree Flaring and Swaging Tool Kits

SKU: IMP-275FS
Where To BuyRequest A Quote

Capacity Tubing O.D. (In.): Flares 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4; Swages 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4.

Imperial 275FS 45 Degree Flaring and Swaging Tool Kit
Imperial 275MFS Metric 45 Degree Flaring and Swaging Tool Kit

Description

Imperial 275-FS 45 Degree Flaring and Swaging Tool is a screw-type feed; ideal for use in close quarters Swivel-type swaging adapters and flaring cone are hardened steel chrome-finished for easy operation Two bars included — covers nine sizes Self-centering, slip-on forged steel yoke Includes tool case Flares: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″ and 3/4″ O.D. tubing Includes: 5 swage adapters that swage 7 tube sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″ and 3/4″ O.D. tubing.

This instrument 275-FS Flares and swages converts quickly. Screw-type feed. Ideal for use in close quarters. Two bars included cover 9 sizes. Swivel-type swaging adapters and flaring cone are hardened steel, chrome finished for easy operation. Self-centring, slip-on forged steel yoke.

FEATURES:

  • For 1/8” to 5/8” (4mm to 15mm) O.D. tubing
  • With a minimum clearance radius of just 1-1/4”, the ratcheting tube cutter is ideal for use on pipework in confined spaces or against walls.
  • The unique ratcheting design enables the cutter to complete entire revolutions of the pipework, with maximum leverage, by simply moving the handle up and down.
  • The TC-1050 cutter can easily be removed from the handle. Includes (1) S32633 general-purpose cutter wheel.
  • Ergonomic handle with non-slip grip.
  • 100% factory tested to ensure accurate spiral-free cutting.
  • Six independent drive pawls provide a 15° arc-swing.

 

INCLUDES:
1 x Tool case, Flares 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”, 3/4” O.D and 5 swage adapters for 7 tube sizes: 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” O.D and Limited Lifetime Warranty (Conditions apply).

 

SPECIFICATIONS:

  • Item: Flaring and Swaging Tool
  • Flare Type: 45 Degrees Single Lap
  • Capacity Tubing O.D. (In.): Flares 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4; Swages 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4
  • Application: For Soft Copper, Brass and Aluminum Tubing
  • Overall Length (In.): 7
  • Handle: Sliding T
  • Nominal Capacity: 1/8 into 3/4 in O.D. Tubing
  • Wall Thickness: .035 in
  • Weight: 1.59 kg
  • Warranty: Limited Lifetime (Conditions apply)
  • Country of origin: USA.